20
Multimedia Pocket
2 Press and hold the release button (A), and slide the device out
of the multimedia pocket.
3 Carefully insert the device into the multimedia pocket by push-
ing the both corners until it surely fits in the slot.
z The computer must be on when inserting the device.
z Insert the device with the label side up.
CAUTION
z Hold the device on its both sides. Otherwise the device may be damaged.
z Do not apply excessive force when raising the slot side upward and inserting the
device.
NOTE
z The procedure to disable the multimedia pocket device is not necessary when you remove the device after turning off
the computer.
z You can see that the device is recognized or not by double-clicking
on the notification area, or checking the [Infor-
mation] menu in the Setup Utility (Î page 60). (When using a second battery pack, press
Fn
+
F9
.) If the device is not
recognized (or if the media cannot be accessed), turn off the computer and reinsert the device.
To Next Page
Loading...
