54
Wireless LAN
NOTE
z To use wireless LAN, set [Wireless LAN] to [Enable] (default) in the [Advanced] menu of the Setup Utility (Î page 62).
z You may use the [Intel(R) PROSet/Wireless] screen to turn on/off wireless LAN.
Double-click the wireless LAN network status icon ( / / / ) on the notification area, or select [start] -
[All Programs] - [Intel PROSet Wireless] - [Intel PROSet Wireless].
• : Wireless LAN communication is off.
• / / : Wireless LAN communication is on.
z It may take some time to turn off wireless LAN after switching the wireless switch to off.
Setting the profiles
1 Double-click / / on the notification area.
The [Intel(R) PROSet/Wireless] screen appears.
z When or is displayed, skip step
2.
2 When you clicked in step 1, select T and select [Wireless On].
3 Click [Profiles] and click [Add].
4 Enter the profile name and Wireless network name (SSID), and make other necessary
changes, then click [Next].
5 Make necessary settings and click [OK].
6 Select the profile you set and click [Connect].
7 Click [Close].
NOTE
z You need to set the profile for each user.
z The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
z For further information of Intel
®
PROSet/Wireless software, refer to [Help] in the menu bar.
To Next Page
Loading...
