3
Key combinations
Hotkey Settings
Select whether or not to use Fn key lock function and popup displays.
When using the Fn key lock function, after Fn is pressed once, it stays in the “pressed”
position until another key is pressed. This is convenient when it is difficult to press two
buttons simultaneously.
1 Run the Hotkey Settings
Windows 2000 Select [Start] - [Programs] - [Panasonic] - [Hotkey Settings].
Windows XP Select [Start] - [All Programs] - [Panasonic] - [Hotkey Settings].
2 Set the parameters
Set whether or not to use the Fn key lock function.
When the Fn key lock function is enabled.
NOTE
The Fn key lock function also works with Fn and other keys aside from Fx *.
Each user can select separate settings for whether or not to use the Fn key lock
function and popup displays.
Release
Released automatically when
another key is pressed.
Press Fn once more.
Operation
Same operation as when an-
other key is pressed while
Fn is pressed.
Fn key remains “pressed” un-
til Fn is pressed once more.
Number of times
Fn is pressed
1 time
2 times
The full-screen display of command prompts or MPEG files may change to a window
display if the Fn + Fx * keys are pressed. To prevent this, turn the popup window
display function OFF.
This setting is only available when [Use Fn key lock] is checked.
Make sounds when Fn key is pressed:
Notifies the user with a sound when Fn is pressed, locked, or released.
Show status on screen:
Displays the Fn key status in the task bar.
: Fn is locked
: Fn is not locked
3 Select [OK]
* “Fx” indicates any function key from F1 to F10.
To Next Page
Loading...
