Panasonic CF-M34 - Advanced Menu

53
Setup Utility
Device Configuration
Serial Port A
I/O IRQ*
1
Serial Port B
I/O IRQ*
1
Touch Screen
I/O IRQ*
1
Wireless Modem
I/O IRQ*
1
Ring Resume
Power SYNC with PC
Parallel Port
Mode*
2
I/O IRQ*
1
Modem/LAN
Boot up from LAN*
3
Legacy USB Support
USB Floppy Boot
Device Configuration : [BIOS]
Serial Port A : [Auto]
Serial Port B : [Auto]
Touch Screen : [Auto]
Wireless Modem* : [Auto]
Ring Resume*: [Disable]
Power SYNC with PC*: [Independent]
Parallel Port: [Auto]
Mode: [ECP]
Modem/LAN: [Enable]
Boot up from LAN: [Enable]
Legacy USB Support: [Enable]
USB Floppy Boot: [Enable]
BIOS OS
Disable Enable Auto
3F8/IRQ4 2F8/IRQ3 3E8/IRQ5 2E8/IRQ7
Disable Enable Auto
3F8/IRQ4 2F8/IRQ3 3E8/IRQ5 2E8/IRQ7
Disable Enable Auto
3F8/IRQ4 2F8/IRQ3 3E8/IRQ5 2E8/IRQ7
Disable Enable Auto
3F8/IRQ4 2F8/IRQ3 3E8/IRQ5 2E8/IRQ7
Disable Enable
Independent On & Off Off Only
Disable Enable Auto
Uni-directional Bi-directional ECP EPP
378/IRQ7 278/IRQ7 3BC/IRQ5
Disable Enable
Disable Enable
Disable Enable
Disable Enable
Advanced Menu
( : Default)
*
1
This item is displayed only when the setting of each port is [Enable].
*
2
This item is displayed only when [Parallel Port] is set to [Enable] or [Auto].
*
3
[Disable] is automatically set when [Modem/LAN] is set to [Disable].
Parameters
* Only for wireless modem option.