19
Zoom Function
NOTE
z The Zoom ratio returns to 100% in the following conditions even while the screen is zoomed.
• When you switch the log in user
• When the computer resumes from Sleep/Hibernation
• In the log off condition
• When you press
Ctrl
+
Alt
+
Fn
+ (Del)
*1
• When the [User Account Control] screen appears
z [Tablet PC Input Panel] does not display while zooming.
*1
For Numeric keyboard model :
Fn
+ (Ctrl+Alt+Del)
To use the Zoom Cursor, add a check mark for [Use Zoom Cursor] by following procedure below.
The Cursor changes to while using the Zoom function. will also be displayed when it is on the frame of Windows.
1 Click on the notification area and then click .
Zoom menu appears.
2 Click [Use Zoom Cursor] to add a check mark.
NOTE
z [Use Zoom Cursor] appears only in the following conditions.
• The zoom ratio is 100% (100% Zoom).
• There is no check mark for [Zoom Up Area by Moving Cursor Position].
• Windows Aero is off.
z When using application software displaying a unique cursor (i.e. Paint), note the following
restrictions.
• The cursor unique for the application software is not enlarged.
• The cursor unique for the application software may not be displayed at the right position. Confirm the operation
position using the Windows cursor (enlarged cursor when zoomed).
Using Zoom Cursor
To Next Page
Loading...
Need help?
General