75
14.7 Dew Prevention Control
• To prevent dew formation at indoor unit discharge area.
• This control starts if:
o Cooling mode or Quiet mode is activated.
o Remote Control setting temperature is less than 25°C.
o Fan speed is at CLo or QLo.
o Room temperature is constant (±1°C) for 30 minutes.
o Compressor is continuously running.
• Fan speed will be adjusted accordingly in this control.
o Fan sped will be increased slowly if the unit is in quiet mode and Lo fan speed.
• Dew prevention stop condition.
o Remote control setting temperature is more than 25°C.
o Fan speed is not at Lo or QLo.
o Select Powerful operation.
To Next Page
Loading...
Need help?
General
