2. Remove the Fan Motor by:-
−
Release the Fan motor leadwire by pressing the
hook at the center of the connector. (Fig. 4
−
Then remove the particular piece that holding the
fan motor by pressing the tab. (Fig. 4)
−
Remove the discharge grille and then the drain
hose. (Fig. 4)
−
Finally remove the fan motor by removing the screw.
(Fig. 5)
−
REMINDER - To reinstall the fan motor, adjust the
connector of the fan motor as Fig. 5.
Fig. 4
Fig. 5
66
S-C75KE CU-C75KE / CS-C95KE CU-C95KE / CS-C125KE CU-C125KE