45
12. Operation Control
12.1 Cooling Operation
• Cooling operation can be set using remote control.
• This operation is applied to cool down the room temperature to the setting temperature set on the remote control.
• The remote control setting temperature, which takes the reading of intake air temperature sensor, can be
adjusted from 16°C to 30°C.
• During cooling operation, the compressor will stop and restart as shown in figure below:
12.1.1 Cooling Operation Time Diagram (For CS-C9KK CU-C9KK and CS-C12KK CU-
C12KK)
To Next Page
Loading...
