9.1.8. Filter Cleaning Indicator
·
The blinking filter lamp warns the user that the air filter is dirty. When
the air conditioner has operated for a total of 360 hours or so, this lamp
blinks during cooling and heating operation and stop.
·
The blinking filter lamp is turned off by pressing the filter reset button.
·
The total operating time of the air conditioner is stored in the memory
after each hour elapses.
(Operation is detected by the change in the fan speed of the indoor
unit fan motor.)
·
The total operating time data in the memory is not erased even when
the power is turned off.
·
The time can be reset by the remote control unit even during stopping.
9.1.9. Odour Wash Operation
·
The odour particles which have accumulated on the heat exchanger during fan and heating operations are volatilized and
cleaned off.
9.1.9.1. Odour Removing Mode Operation (In Season)
·
Whether the odour removing mode is ON or OFF is indicated by the odour wash lamp which is lighted or off.
·
This function works during cooling and dry mode operations at the automatic fan speed setting performed in season.
33
CS-ME7CKPG / CS-ME10CKPG / CS-ME12CKPG / CS-ME14CKPG / CS-ME18CKPG / CU-2E15CBPG / CU-2E18CBPG / CU-3E23CBPG / CU-4E27CBPG
To Next Page
Loading...
