9.1.9.2. Odour Clear Mode Operation (Off-Season)
·
By conducting heating operations simultaneously in all the rooms for a short period of time, the odour components are removed,
the insides of the indoor units are dried out, and the growth of mold is minimized. Odour clear control has two operation modes:
odour clear mode (without timer setting) that minimizes the growth of mold, and odour clear mode (with timer setting) which
mobilizes a specialized function for removing odour components.
·
Odour clear mode
The odour clear mode of all rooms are carried out by setting the odour clear mode of one room.
(1) Odour clear mode operation (without timer setting)
·
The POWER lamp lights if the air conditioner is operated before the odour clear operation, and it goes off if air conditioner has
been stop.
·
Operation is switched to odour removing control 20 minutes after the odour clear operation started.
·
Time chart
34
CS-ME7CKPG / CS-ME10CKPG / CS-ME12CKPG / CS-ME14CKPG / CS-ME18CKPG / CU-2E15CBPG / CU-2E18CBPG / CU-3E23CBPG / CU-4E27CBPG
To Next Page
Loading...
