PREPARATION BEFORE OPERATION
! Warning
■ Ensure the power plug is securely inserted.
A loose plug may cause a fire or an electric shock.
5
Insert the air filters
4
Insert the air purifying filters
6
Close the front panel
■ Notes
DBT: Dry Bulb Temp
WBT: Wet Bulb Temp
Maximum Temperature
Minimum Temperature
DBT
32
16
WBT
23
11
DBT
43
16
WBT
26
11
Indoor Outdoor
(Unit in °C)Use under the following conditions
● Indoor Unit
• If the unit is not going to be used for an extended
period of time, turn off the main Power supply. If it is
left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has been
turned off with the remote control.
• If operation is stopped, then restart immediately, the
unit will resume operation only after 3 minutes.
P
O
W
E
R
E
C
O
N
O
M
Y
P
O
W
E
R
F
U
L
S
L
E
E
P
T
I
M
E
R
1
Connect the power
supply cord to an
independent power
supply.
3
Remove the air filters
2
Open the front panel
48
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
To Next Page
Loading...
