Copying video
VQT4C69
48
Copying titles
To register the external HDD (USB HDD)
Refer to “Registering the external HDD
(USB HDD)”. (> 72)
To copy HD Video (AVCHD format) to the
DVD-R in High Definition
Refer to “Copying HD Video (AVCHD format) to
the DVD-R in High Definition”. (> 55)
Release the disc protection
Refer to “Disc Protection”. (> 70)
• If you wish to choose the audio language, select the
language from “Multi Audio” of “Preferred Language” before
copying (> 78, 82).
• Following operations cannot be performed while copying in
high speed mode without finalising or creating Top Menu.
- playback of disc
- playback of SD card
- playback of USB memory
- playback of photo recorded on HDD
- playback of music recorded on HDD
• Simultaneous operation is not possible while copying in
normal speed or copying in high speed mode with finalising
or creating Top Menu.
§1, 2
§1
The title in the source media will be deleted.
§2
The recording mode cannot be changed.
1 Insert or connect the media.
2 Press [DRIVE SELECT] to select “HDD”,
then press [DIRECT NAVIGATOR].
3 Select the title, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
4 Press the blue button.
5 Set the copy direction, then press [OK].
6 Select “Yes”, then press [OK].
• If you select “No”, you can change the
selection. (> 49)
Start Time
Prog.Type:
Rec time
Channel Date Title Name
Movie
9:00
7 Set other settings, then press [OK].
e.g.,
(> 49, Setting the copying options)
8 Select “Yes”, then press [OK].
Standby status can be changed if required
Please press OK to start copying.
OK
RETURN
Automatic Standby after Copy
Off
DMRBWT720GZ_eng.book 48 ページ 2012年2月28日 火曜日 午後1時15分