VQT2J45
41
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other equipment.
Tips
To remove the noise from a paused picture:
Start slow-motion (> 40), then adjust the tracking.
Notes
≥This function may not work with some tapes.
≥You can also adjust the tracking with [CH WX] on the main unit.
Adjust the vertical synchronisation to stop the picture
from shaking while paused.
Notes
≥This function may not work with some tapes.
≥You can also adjust vertical synchronisation with [CH WX] on the
main unit.
The audio changes as follows.
L R (Stereo)
---------------> L ---------------------> R
^ No display (Normal audio track)
1 VHS drive indicator
2 L and R indicators
The Left (L) and Right (R) indicators show which sound mode is
selected as follows:
L R (Stereo): Hi-Fi stereo audio
L -: Mono L audio of the Hi-Fi stereo audio
- R: Mono R audio of the Hi-Fi stereo audio
- - (Normal): Normal audio
3 Recording mode (> 27)
4 Operation status
5 Shows the tape counter and remaining tape time
Pressing [STATUS ] to cycle the display as follows:
No display > Tape counter
^ Remaining tape time
≥Press [DELETE ¢] to reset the tape counter (elapsed time) to
“0:00.00”. The tape counter is automatically reset when inserting a
video cassette.
Notes
Remaining tape time display
≥The displayed time is approximate.
≥The displayed time will be incorrect if you set the wrong tape length in
“Tape Length” in the Setup menu (> 83) and if the tape is of poor
quality.
Adjusting the Playback Picture
Manual Tracking
During playback
or
Press and hold until the picture noise
disappears.
To return to auto tracking:
(simultaneously).
Vertical Locking Adjustment
While paused
or
Press and hold until the shaking stops.
To return to the standard position:
(simultaneously).
Changing Audio during Playback
Press and hold for about 5 or
more seconds.
CH
CH
CH
CH
CH
CH
STTL
On-screen Display Indicators
to display on-screen indicators.
STATUS
DMR-EX99VEB_VQT2J45.book 41 ページ ２０１０年１月７日 木曜日 午後１時４１分
To Next Page
Loading...
Need help?
General
