Playing back video
VQT4E90
43
Select the desired audio with “Multi Audio” in the
Disc menu (> 68).
[HDD] [USB_HDD] [BD-RE] [BD-R]:
1 Press [STTL ].
2 Select “On” or “Off”.
• If you want to switch the subtitle language,
select it in the Disc menu (> 68).
[BD-V] [DVD -V ], DivX and MKV:
Display with “Subtitles” in the Disc menu (> 68).
[HDD] [USB_HDD] [BD-RE] [BD-R]
1 Press [AD].
2 Select “Audio Description” and set to
“Automatic”.
3 Select “Volume”, then adjust the volume with
[2, 1].
• When “Dolby D / Dolby D + / Dolby TrueHD”, “MPEG” or
“HE-AAC” is set to “Bitstream”, the Audio Description may
not work. Set them to “PCM” (> 77, Digital Audio Output).
• You can also set “Audio Description” active in the Setup
menu. (> 74)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 85)
Preparation
Connect 3D compatible TV to this unit. (> 13)
• Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
Perform the following settings as necessary.
3D BD-Video Playback
It is also possible to play back 3D discs in 2D
(conventional video). (> 70, 75)
3D Type
If 3D video cannot be played back in 3D, you may
be able to play it in 3D by changing the setting.
(> 70, 78)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (> 70, 78)
3D Playback Message
Hide the 3D viewing warning screen. (> 70, 78)
Graphic Display Level
Adjust the 3D position for the playback menu or
message screen etc. (> 68)
Changing audio
Switching subtitles
Listening to the Audio Description
Aspect
3D video playback
Preparatory 3D settings
DMR-PWT520&420EB_eng.book 43 ページ ２０１２年３月２３日 金曜日 午後４時４２分
To Next Page
Loading...
