Convenient functions
VQT4E90
74
Changing the unit’s settings (Setup)
Signal Condition
You can check the quality and strength of
signals.
Press [CH WX] to select the channel.
• Signal Quality:
Red bar: Bad
Yellow bar: Poor
Green bar: Good
• Signal Strength:
“0”: 0%
“10”: 100%
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Channel Name
DVB Signal Condition
RETURN
Channel Up
Channel Down
Signal Strength
Bit Error Rate
Signal Quality
Frequency
[ ]
MHz
Network Name
CH
100
100
Child Lock
• PIN is required to change. (> 72)
Child Lock List
You can restrict the viewing of channels.
You can lock each channel.
1 Select the channel to lock.
2 Press [OK].
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
Freeview Players
You can restrict the viewing of Digital teletext
(MHEG) unsuitable to children.
Preferred Multi Audio
Multi Audio
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
Audio Description
(When Audio Description is available in the
programme)
When “Automatic” is selected, Audio
Description will be set as default while
watching.
• When “Dolby D / Dolby D + / Dolby TrueHD”, “MPEG”
or “HE-AAC” is set to “Bitstream”, the Audio
Description may not work. Set them to “PCM”
(> 77, Digital Audio Output).
Preferred Subtitles
Subtitles
Choose the subtitle language for broadcast. If
the selected language is not available, then
the original language will be selected.
DMR-PWT520&420EB_eng.book 74 ページ ２０１２年３月２３日 金曜日 午後４時４２分
To Next Page
Loading...
Need help?
General
