Panasonic Diga DMR-PWT420 User Manual

Troubleshooting
VQT4E90
94
Troubleshooting guide
If there is any problem, the following message is
displayed on the screen.
When you experience problems with
Easy Network Setting
Wireless Settings
Display Check the following
A conflict with
other devices
occurred.
• Please wait a few moments,
and then try again.
A time out error
occurred.
• Setting of the Wireless router
for MAC Address etc.
• The signal may be weak.
[PWT420] Using the USB
extension cable supplied with
the Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
• The SSID and the encryption
key of the Wireless router.
• Please wait a few moments,
and then try again.
An
authentication
error or a time
out error
occurred.
A device error
occurred.
• [PWT420 ] Connection of
Wireless LAN Adaptor
• If the problem is not solved,
consult your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
• Connection
of the LAN
cables
(> 16)
• Settings of
the hub and
router
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
• Connection
and settings
of the hub
and router
• Settings of
“IP Address /
DNS
Settings”
(> 70, 80)
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Home
network
available”
3. Connection to
gateway:
“Fail”
DMR-PWT520&420EB_eng.book 94 ページ ２０１２年３月２３日 金曜日 午後４時４２分

Panasonic Diga DMR-PWT420 Specifications

General

Brand	Panasonic
Model	Diga DMR-PWT420
Category	Blu-ray Player
Language	English