Panasonic DMCFZ100 - DIGITAL STILL CAMERA - [Leveling]

- 174 -
Advanced (Playback)
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] Mode menu. (P28)
Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and
then press [MENU/SET].
• When [SINGLE IN BURST GROUP] is selected, press 3/4/2/1 to select burst
picture group, and press [MENU/SET] to proceed to step
3.
Press 2/1 to select the picture, and then press [MENU/SET].
Press 2/1 to adjust the tilting, and press [MENU/
SET].
1: clockwise
2: counter-clockwise
•
Up to 2 o can be adjusted.
Press 3 to select [YES] and then press [MENU/
SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
Note
•
Quality of image may become coarse when leveling is performed.
• Recorded pixels may decrease compared to original image when leveling is performed.
• Leveling may not be performed on images recorded with other equipment.
• Motion pictures, pictures stamped with [TEXT STAMP] and pictures taken with the [QUALITY]
set to [ ], [ ] or [ ] cannot be leveled.
• Information regarding the Face Recognition in the original picture will not be copied to images
having undergone [LEVELING].
[LEVELING]