- 180 -
Advanced (Playback)
Pictures can be deleted. Pictures cannot be restored once deleted.
Select [DELETE] on the [PLAYBACK] Mode menu. (P28)
Press 3 to select [YES] and then press [MENU/SET].
Press [‚] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
Note
•
Do not turn the camera off while deleting (while [‚] is displayed). Use a battery with sufficient
battery power or the AC adaptor (optional) and DC coupler (optional).
• Deleting will stop midway when [MENU/SET] is pressed while deleting multiple pictures.
• Depending on the number of pictures to be deleted, it may take some time to delete them.
• If pictures do not conform to the DCF (excluding AVCHD) standard or are protected (P179),
they will not be deleted.
[DELETE]
Press 3/4 to select the item and then press
[MENU/SET].
• When [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] is selected, press 3/4/2/1 to
select Burst Picture Group, and press [MENU/SET] to proceed
to step
3.
Select the picture, and then
press [MENU/SET] to set.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
•
The setting is canceled when
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
To Next Page
Loading...
