Panasonic DP-C262 - Page 18

18
Conguring
the Printer Driver
Settings
12. Duplex
Duplex (double-sided) is the process of printing on both sides of a piece of paper.
None
Select this for single-sided printing. The default is None.
Flip on Long Edge
Perform double-sided printing, ipping the paper
along its long edge (sometimes called Long Edge
Binding).
Flip on Short Edge
Perform double-sided printing, ipping the paper
along its short edge (sometimes called Short Edge
Binding).
Note:
Duplex printing is available if
Media Type
is set to
Plain
,
Glossy/Photo Paper
,
Recycle
.
Portrait format Landscape format Portrait format Landscape format
13. Duplex Margin
Species the gutter for duplex printing.
Set the gutter in a range of 0.0-2.0 in (0-50 mm).
14. Layout Print
Allows printing of documents in a variety of layouts.
Pages per Sheet Save paper by printing several pages reduced onto a single sheet.
Booklet
This feature is handy for creating your own booklets. After printing, fold sheets
in half to create booklets.
Fit to Output
Paper Size
Scales the source document to t it onto the specied paper.
Zoom Prints documents at the specied magnication.
Poster
Enlarges single-page documents for printing on several sheets. Assemble the
printed documents to make posters.
Note:
Windows NT 4.0:
This feature cannot be used when sending print jobs to a shared network printer.
Windows 2000/Windows XP/Windows Server 2003:
This feature is unavailable if the Windows NT 4.0 printer driver is installed. Be sure to install the driver that matches
your operating system.