Panasonic DVD-A7

Simple setup -co,.,_-tlo.to. _slo,,
II
[]
-Ig,lg,EI
-m
Numbered buttons
(display on the unit)
_ 2 p,m_s Le_ 8 _
am3 MsnuLar_._ EnoN_
_,= 6 TV A_ge_ 4;3
] t
_- .... []
_ ..... r'-n
[]
%
] t
o_c L=n_ges
_ 2 _aargs Le._ e _
_ 3 M=nuL=_u_e En_eh
_5 FL _ly 8rqd
pr_. glETORN i,, e_
] t
3 LCD P_
P_ R_TURN to =_
Carry out the following operation to suit the type of television you
are using, The factory setting is for a regular 4:9 television.
• Turn the television on.
• Switch the video input mode on the television to suit the type of
connection you have made (e.g, VIDEO 1),
n Press [POWER] to turn the unit on.
[]Press [ACTION] to display the initial settings
screen on the television.
_1 Operate the joystick to highlight "6 TV
Aspect".
Press the joystick to proceed to the next screen
L_ Operate the joystick to highlight the size of
your television.
[]
1. 4:3 (factory setting)
2. 16:9 (wide-screen television)
Press the joystick to proceed to the next screen
Operate the joystick to highlight the type of
television you have connected.
1. Standard (Direct View TV) (factory setting)
2. CRT Projector
3, LCD Projector
4. Projection TV
Press the joystick to confirm your selection and return to the
initial settings screen.
ImPress [RETURN] to exit the initial settings
screen.
• [RETURN] button
Press to return to the previous screen. Settings are not entered.
• Numbered buttons
Press the number corresponding to the menu item to enter a
setting.
If you have connected your television through the component video
input terminals change the black level for a better picture ('4' "Black
Level Control", page 32).
VQT8354