I Audio settings
f
ii
Speaker Setting
Choose the settings to suit your speaker
system,
• Speaker mode
Choose the size of your speakers and
whether they are connected or not. If you
set a speaker as being not present, sound
will not be output from that speaker even if
itis connected,
• Delay time
Change these settings to make up for
differences in the distances between the
speakers and the listening position.
• Test
Use this test to adjust the volume balance
of your speakers.
Speaker settings screen
Speaker mode
(Front L)
Speaker mode
(Center)
Speakermode
(Front R)
Delay time Channel balance
(Center)
Speaker
mode
(Subwoofer)
Channel
balance
(Subwoofer)
Speaker mode Speaker mode
(Surround L) (Surround R)
Channel balance Channel balance
(Surround L) (Surround R)
Delay time
(Surround L/R)
J
o-o O-O
ACTION
RETURN
Ci
While stopped, press
ACTION [ACTION].
82 Ratings Level 8 =_
I;_ 3 Menu t_nguage E ngJish
_1_ 4 On Screen Messages
5 FL DiSplay Bright
_. 6 TV Aspect 4:3
70igi_al Audio Output
8 speaker Se_ng Mu_haneel
9 Other _ttings
Press RETURN 10exit
Initial settings screen
Item Speaker mode
Content
Underlined values are factory settings.
"Large" speakers are capable of reproducing sounds below
100 Hz. "Small" speakers are other types.
Front speakers (L/R) Example (LS):
L_Small
Center speaker
Larae/SmalVNo • Large
Subwoofer
Y_./No '_
Surround speakers (LSIRS)
L_L_L_/SmalI/No
• Small
8
• • • No
bo_speakers to
If you set the subwoofer to "No", set
"Large".
I_FJ'FJI
When playing DVD-AOdio, the software settings may override any
settings you change here. "P.PCM" appears or "D.MIX" disappears
on the main unit.
"2-charmer'
Select if you have connected the unit to other equipment with a
stereo connection cable through the front left and dght terminals of
the 5.1-channel connection terminals. You will return to the initial
settings menu when you press [ENTER]•
VQT8354
To Next Page
Loading...
