Speaker settings are only necessary ff you connected the unit to your television or amplifier with stereo connection cables. I
Select "8 Speaker
t Setting" and press,
4!-
, Repeattomake ,
: otherchanges I
T
Select"1 Multi- Selecttheftem Se_,ctthe new
._ channel" and press. _ you wantto _ seeing and press.
change and press. ==
_ 1 MUl_i-_hanr_l
_ 2 2_hanneq
press RETURN to exit
1 DiSC Languages
_2 Ratings Level 8 _'
3 Menu L_P_age J.r_3_sh
_;_ 4 On-Screen Me_sages
I_ 5 FL Display Br_ht
6 TV _pt_t 4:3
70_i_l Audio Output
9 _her Se_ngs
Pre_ RETURN to exd
See the note at the foot of page 40 for
details about "2-channel".
p,
Delay time
the diagram on
page 40
Speak_ Seffi,_g
! .,,-.°.;0..,:-."
%
I
Test (to adjust Channel balance)
The optimum when listening to 5.1 channel sound is for an the speakers, except for the
subwoofer, to be the same distance from the listening position.
With Dolby Digital, you can adjust the delay time for the center and surround speakers to
make up for differer_cesin distances between the speakers.
These adjustments will have no effect on DTS or DVD-Audio sources.
Ideal center speaker position
• Center speaker
Set delay time to 0 ms if DF is
less than or equal to Dc.
(f (_F--DC = then set to
50 cm 1.3 ms
100 cm 2.6 ms
t50 cm 3.9 ms
200 cm 5.3 ms
• Surround speakers
Set delay time to 0 ms if DF and
Ds are equal.
If DF-DS = then set to
200 cm 5.3 ms
400 cm 10.6 ms
600 cm t5.9 ms
The factory setting is 0 ms for both
types of speakers.
... ,::.:-r ... Front
..- Center ....
....
:" D¢ DF
I ISurround
,,, ,+%
i.,
'.... ..++'+"I
........ .... .. " Ideal Surround
speaker position
Place all your speakers within this
circumference
A test signat is output from one speaker at a
time, starting with the front left speaker and
proceeding clockwise,
Front(loft)_ Center_ Front (right)
Surround(left) _ Surround(right)
Adjust the volume of the center and surround
speakers so they are the same apparent
I votume as the front speakers. The front
speakers cannot be adjusted here and there
=sno signal output from the subwoofer.
Adjusting volume
Move the joystick up or down when the test
signal is output from the speaker you want to
adjust, The signal wnl continue to come from
that speaker as long as you continue
adjustments.
To stop the test signal
Press the joystick.
To adjust the volume of the subwoofer
1. Use the joystick to highlight the channe
balance box for the subwoofer and press.
2. Move the joystick up to raise the volume
or down to lowerthe volume and press.
I
I
To return to the previous menu
Press [RETURN].
To clear the menus
Press ]RETURN] untilto returnthe previous screen.
To exit
Highlightthe "Exit" box and press the joystick.
VOT8354
To Next Page
Loading...
