Panasonic DVD-LV75

For Your Reference
Connection to an amplifier with a built-in decoder (or an
amplifier and decoder combination) (Digital connection)
(DVD-LV70 and
DVD-LV55 have only one AUDIO terminal.)
1 Connect the equipment.
2 Adjust the settings to suit the equipment you have connected
(➡ page 40, “Digital settings”).
Note
You cannot use a DTS decoder that cannot handle signals from DVDs.
This figure shows DVD-LV75.
35
RQT5897
For Your Reference
RQT5897
AUDIO VIDEO
S VIDEO OUT
5.1CH OUT
IN/OUT
OPTICAL
INPUT
OPT OUT
Speakers
The optimum setup is to arrange
the speakers in a circle with the
listening position in the center.
This unit
Optical fiber cable
Do not bend when connecting.
Decoder
AV Amplifier
Example: Connecting to 6 speakers
AV amplifier with a
built-in decoder
Connection to an amplifier with 5.1 channel input terminals
(Analogue connection
)
1 Connect the equipment.
≥If you have not connected a subwoofer, you should connect front speakers that are capa-
ble of producing bass under 100 Hz if possible.
2 Adjust the settings to suit the speakers you have connected (➡ page 38,
“Speaker settings”).
Note
Turn V.S.S. off. Sound will only come from the front speakers if V.S.S. is on.
DVD-LV75
AUDIO VIDEO
S VIDEO OUT
5.1CH OUT
CENTER
INPUT
SUBWOOFER
INPUT
SURROUND
INPUT
FRONT
INPUT
RL RL
IN/OUT
OPT OUT
34
Enjoying more powerful sound
Stereo connection cables
Ensure the terminals are correct
when making connections.
Speakers
The optimum setup is to
arrange the speakers in a circle
with the listening position in the
center.
AV amplifier with 5.1 ch
input terminals
This unit
Example: Connecting to 6 speakers
(red) (red) (red)(white) (white)(white)
(black) (black) (black)
rqt5897p28-39.qxd01.1.162:23PM ページ34