Panasonic DVD-LV75

Preparation
Turn on this unit and the equipment you have connected.
While stopped
1 Press [ACTION] or [MENU] to show the initial settings screen.
2 Use the cursor jockey [3, 4] to select “6 Digital Audio Output” and
press [ENTER].
3 Use the cursor jockey [3, 4] to select an item and press [ENTER].
(For details, see page 41)
4
Press [RETURN] to complete the settings.
∫ To return to the previous menu
Press [RETURN].
Settings
∫ PCM Down Conversion: Output during play of DVDs recorded in 96 kHz linear
PCM.
No : When you have connected an amplifier with stereo connection cables.
Yes: When you have connected an amplifier with an optical fiber cable.
Yes: Copyright protection limits digital output to 48 kHz/16 bit.
When playing DVDs recorded in 96 kHz
Sound is output as follows in accordance with the connections and settings you have made.
§The connected equipment must be able to handle 96 kHz LPCM in order to take advan-
tage of high quality audio found on these discs.
∫ Dolby Digital: Output during play of DVDs recorded with Dolby Digital.
Bitstream: When you have connected a unit with a built-in Dolby Digital decoder
PCM : When you have connected a unit that doesn’t have a built-in Dolby Digital de-
coder
∫ DTS Digital Surround: Output during play of DVDs recorded with DTS Digital
Surround.
PCM
§
: When you have connected a unit that doesn’t have a built-in DTS decoder
§ Off
Bitstream: When you have connected a unit with a built-in DTS decoder
Note
Ensure “Dolby Digital” and “DTS Digital Surround” are set to “PCM” (or “Off”) if you connect
this unit to a digital amplifier without a decoder. If the signals are output as bitstream, “noise”
will be output which can cause harm to your ears and speakers and the signal will not be
correctly recorded onto MDs.
DVD-LV70






 DigitalAudioOutput

1
PCMDownConversion 
2 DolbyDigital
3
DTSDigitalSurround 





 PressRETURNtoexit


No

Bitstream
PCM



40
41
RQT5897RQT5897
For Your Reference
For Your Reference
Digital settings
Factory Preset
Connection
Setting
No
Yes
Analogue
Output as 96 kHz
Converted and output as
48 kHz
Digital
No output (Audio will be output at
96 kHz if the DVD has not had copyright
protection recorded on it.
§
)
Converted and output as 48 kHz/16 bit
rqt5897p40-51.qxd01.1.162:24PM ページ40