Error Code Error Content Additional error explanation
F601 Indeterminate sector ID
requested
Operation stopped caused by the request to
access abnormal ID data
F602 Access failure to LEAD-
IN caused by
demodulation error
LEAD IN data unreadable
F603 Access failure to
KEYDET caused by
demodulation error
Access failure to CSS data of disc
F610 ODC abnormality No permission for command execution
F611 6626 QCODE don’t
read Error
Access failure to seek address in CD series
F612 No CRC OK for a
specific time
Access failure to ID data in DVD series
F630 No reply to KEY DET
enquiry
(for internal use only)
F631 CPPM KEY DET is not
available till the FILE
terminal
(CPPM file system is unreadable caused by
scratches)
F632 CPPM KEY DET is not
available
Been revoked or falsified
F103 Illegal highlight Position Big possibility of disc specification violation during
highlight display
F700 MBX overflow When replying message to disc manager
F701 Message command
does not end
Next message is sent before replying to disc
manager
F702 Message command
changes
Message is changed before it is sent as a reply to
disc manager
F880 Task number is not
appropriate
Message coming from a non-existing task
F890 Sending message when
message is being sent
to AV task
Sending message to AV task
F891 Message couldn’t be
sent to AV task
Begin sending message to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language area
abnormality
Firm version agreement check for factory preset
setting failure prevention
F896 No existence model Firm version agreement check for factory preset
setting failure prevention
F897 Initialize is not
completed
Initialize completion check for factory preset
setting failure prevention
F8A0 Message command is
not appropriate
Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
8.3. Last Error Code saved during NO PLAY
Error code Error Content System computer Setting task System computer internal error code
F0BF 6) Cannot playback because
physical layer is not recoginizable
PCND_NOPLAY PHYSICAL
0x50
DiscManager 0xDOBF
F0C0 8) DVD: Cannot playback because it
is not DVD Video/Adio/VR
PCND_NOPLAY VIDEO 0x70 DiscManager 0xDOC0
F0C1 9) DVD: Prohibited by the restricted
region code
PCND_NOPLAY RCD 0x80 DiscManager 0xDOC1
F0C2 A) DVD: PAL restricted playback PCND_NOPLAY PAL 0x90 DiscManager 0xDOC2
F0C3 B) DVD: Parental lock setting
prohibits the playback of the entire
title
PCND_NOPLAY PTL 0xA0 DiscManager 0xDOC3
F0C4 C) VCD: Prohibited because it is in
PHOTO CD fromat
PCND_NOPLAY PHOTO CD
0xB0
DiscManager 0xDOC4
F0C5 VCD/CD: Prohibited because it is
CDROM without CD-DA
PCND_NOPLAY CDROM 0xC0 DiscManager 0xDOC5
16
DVD-S35E / DVD-S35EB / DVD-S35EG / DVD-S31EG
To Next Page
Loading...
