Panasonic DVD-S35E

b. Inch the tray frontward until convex phase and
concave phase mate.
Caution:
Make sure to mate convex phase and concave phase
properly, so that the gap between turntable and tray
becomes 5mm or less.
9.5. FG PCB Unit
1. Unscrew the screw.
2. Remove the FG PCB Unit.
9.6. Traverse Block
1. Lift the traverse block while spreading the hook of the
mechanical chassis unit.
2. Disengage the tabs from the holes of the mechanical
chassis unit.
23
DVD-S35E / DVD-S35EB / DVD-S35EG / DVD-S31EG