Panasonic EB-TX210ASG - Phonebook Dialing, Speed Dialing and Super Speed Dialing; Programming Pauses or Waits

Chapter 3
24 Everyday Operations
Phonebook Dialing, Speed Dialing and Super Speed
Dialing
To use these types of dialing, you must first program entries
into the Phonebook.
See “Phonebook Features”, Chapter 5
.
Programming Pauses or Waits
This feature is useful when you are placing a call that requires
entry of additional digits once the call connects (i.e., voice
mail).
1
Enter the phone number.
2
To enter a Pause or Wait time, press and hold until a
P
or a
W
appears after the entered phone number.
• If you program a Pause (
P
), the entered digits are
automatically transmitted during a call after a two-second
delay.
• If you program a Wait (
W
), the entered digits are not
transmitted during a call until you press or
(SEND).
3
Continue to enter digits, Pauses, and Waits as needed.
• In this sample display, the first seven digits are the phone
number to dial. The
W
(Wait) indicates that the phone will
wait until you press to transmit the digits “
901
”. The
P
(Pause) indicates that the phone will then automatically
transmit “
3456
” two seconds after “
901
” is transmitted.
4
Press to place the call.
OR
Press (SAVE) to save the entry into the Phonebook.
(See
Chapter 5, “Phonebook Features”, for information on storing
entries.)