Panasonic GT02

6-2
6.1 GT01
6.1.1 General Specifications
Item
Specifications
AIGT0030B
AIGT0030H
AIGT0130B
AIGT0130H
AIGT0230B
AIGT0230H
AIGT0032B
AIGT0032H
AIGT0132B
AIGT0132H
AIGT0232B
AIGT0232H
AIGT0030B1
AIGT0030H1
AIGT0130B1
AIGT0130H1
AIGT0230B1
AIGT0230H1
AIGT0032B1
AIGT0032H1
AIGT0132B1
AIGT0132H1
AIGT0232B1
AIGT0232H1
Rated voltage
24 V DC
5 V DC
Operating voltage
range
21.6 to 26.4 V DC
4.5 to 5.5 V DC
Power consumption
2 W or less (80 mA or less)
1W or less
(200 mA or less)
Note1)
1.1 W or less
(220 mA or less)
Note1)
Ambient temperature
0 to +50 C
Ambient humidity
20 to 85% RH (at 25 C), non-condensing
Storage temperature
-20 to +60 C
Storage humidity
10 to 85% RH (at 25 C), non-condensing
Breakdown voltage
Between [power supply terminals] and [case]
500 V AC for 1 minute, Cutoff current 10mA (at default setting)
Insulation resistance
Between [power supply terminals] and [case]
100 M or more, 500 V DC, measured with megohmmeter (at default setting)
Vibration resistance
10 to 55 Hz (1-minute cycle)
Amplitude: 0.75 mm, 10 min on 3 axes
Shock resistance
98 m/s
2
or more, 4 times on 3 axes
EMC Directive
applicable
EMC Directive: EN61000-6-2, EN61000-6-4
Not applicable
Noise immunity
1000 V [P-P] or more, Pulse width 50 ns, 1s between power supply terminals
(based on in-house measurements)
Note2)
Protective
construction
IP65 (Initial value, evaluated by us)
Dustproof and drip-proof from front panel only (packing used on panel contact
surface)
Note3)
Weight
Approx. 160 g
Note1) When supplying the power from the TOOL port of a PLC (CPU unit), confirm the PLC restrictions
such as the power supply capacity before use.
Note2) When using our exclusive cable (24 V DC) and the ferrite core attached to the cable (5 V DC).
Note3) When reattaching, replace waterproof packing.