Panasonic GT12

2-3
Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT (Set in the configuration setting of GTWIN.)
Item
Setting
Baud Rate
19200bps
Data Bits
7
Stop Bits
1
Parity
Even
Setting Values for PLC
Item
Setting
Mode of PLC
Monitor Mode
Mode Selection
Higher Order Link
Baud Rate
19200bps
Data Bits
7
Stop Bits
1
Parity
Even
Station Number
0
CTS Setup
Normally ON
DC +5V power supply
No
Type of Communication
RS232C*
*Models that allow RS232C or RS485 communication with the adapter or unit are available.