Panasonic GT12

8-10
8.5 KV-1000 Series Connected using Unit KV-L20R/V
PLC model selection
Select “Keyence KV-1000 Series”.
The following version of GTWIN is required to select “Keyence KV-1000 series” from the PLC model
selection. When the version of your GTWIN is older than the one below, select “Keyence KV-700 series”.
In that case, the range of usable devices is the same as the one for Keyence KV-700 series.
GT
GTWIN Version
GT Version
GT01
Ver.2.90 or later
Ver.1.33 or later
GT02
Ver.2.A0 or later
Ver.1.00 or later
GT02L
Ver.2.B0 or later
Ver.1.00 or later
GT03-E
Ver.2.E0 or later
Ver.1.00 or later
GT05
Ver.2.90 or later
Ver.1.00 or later
GT11
Ver.2.90 or later
Ver.1.23 or later
GT12
Ver.2.97 or later
Ver.1.00 or later
GT21
Ver.2.90 or later
Ver.1.13 or later
GT32
Ver.2.90 or later
Ver.1.00 or later
GT32-E
Ver.2.C0 or later
Ver.1.00 or later
Usable devices
Bit/Word Device
No.
Memo
Bit Device
Relay 00000-59915
Control Relay
CR0000-CR3915
Timer
T000-T511
Counter
C000-C511
High-speed Counter Comparator CTC0-CTC3
It is not possible to output
it.
Word
Device
Data Memory
DM00000-DM39999
Control Memory
CM0000-CM3999
Temporary Data Memory
TM000-TM511
Double
Word
Device
Digital Trimmer
AT0-AT7
Timer(set Value)
T/TC000-T/TC511
Counter(set Value)
C/CC000-C/CC511
High-speed Counter Comparator(set
Value)
CTH0-CTH1
Timer(current)
T/TS000-T/TS511
Counter(current)
C/CS000-C/CS511
High-speed Counter Comparator(current)
CTC0-CTC3