18
VQT5J49 (ENG)
Set the power switch to ON while pressing the lock release button B to turn on
the unit.
A The status indicator lights on.
≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the
power switch to OFF once, and then to ON again.
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is opened.
The viewfinder is turned on when the LCD monitor is closed.
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
≥ The unit supports both operations using the cursor buttons and operations using the touch
screen. Select the optimal method according to the situation.
≥ In this operating instructions, the majority of functions are described on the basis of
operations using the cursor buttons.
∫ Touch
Touch and release the touch screen to select icon or
picture.
≥ Touch the centre of the icon.
≥ Touching the touch screen will not operate while you
are touching another part of the touch screen.
Preparation
Turning the unit on/off
Preparation
Using the LCD monitor/Viewfinder
To turn off the unit
Set the power switch to OFF while
pressing the lock release button.
The status indicator goes off.
HC-MDH2&MDH2M_GN-VQT5J49_mst.book 18 ページ ２０１４年２月６日 木曜日 午後４時１分
To Next Page
Loading...
