20
VQT5J49 (ENG)
The clock is not set at the time of purchase. Make sure to set the clock.
1 Select the menu. (l 21)
2 Select the date and time to be set using the
cursor button right or left, then adjust the
desired value using the cursor button up or
down.
≥ The year can be set between 2000 and 2039.
3 Select [ENTER] using the cursor button right or left, then press the
button in the centre.
≥ The screen may switch to the setting screen for the [TIME ZONE]. Using cursor
button and set the [TIME ZONE].
≥ Select [EXIT], then press the button in the centre or press the MENU button to
complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
Preparation
Setting date and time
: [OTHER FUNCTION] # [CLOCK SET]
MENU
HC-MDH2&MDH2M_GN-VQT5J49_mst.book 20 ページ ２０１４年２月６日 木曜日 午後４時１分
To Next Page
Loading...
