19
(ENG) VQT5J49
∫ Slide while touching
Move your finger while pressing on the touch screen.
∫ About the operation icons
≥ To operate the following icons using the cursor buttons, select the desired icon using the
cursor buttons and then press the button in the centre. (Excluding some functions)
///:
These icons are used to switch the menu and
thumbnail display page, for item selection and setting
etc.
:
This icon is used to return to the previous screen such
as when setting menus.
≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
It adjusts the field of view to show the image on the viewfinder clearly.
1 Adjust the viewfinder to suit your
vision so that you can see the
display images clearly.
≥ Be careful not to trap your fingers when moving
the viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o.
≥ Close the LCD monitor and turn on the
viewfinder.
2 Adjust the focus by operating the
eyepiece corrector lever.
Adjusting the field of view
A Eyepiece corrector lever
HC-MDH2&MDH2M_GN-VQT5J49_mst.book 19 ページ ２０１４年２月６日 木曜日 午後４時１分
To Next Page
Loading...
