- 55 -
Changing the playback settings and playing back the
slide show
1 Select using the cursor button,
then press the ENTER button.
2 (Only when you would like to change the
settings)
Select the item to change and press the ENTER button.
3 (When [DATE SETUP] is selected)
Select the playback date, then press the ENTER button.
(When [SLIDES INTERVAL] is selected)
Select the interval of playback for the slide show and press the ENTER
button.
(When [MUSIC SELECT] is selected)
Select the desired sound and press the
ENTER button.
4 Select [START] and press the ENTER button.
5 Select the playback operation. (l 24)
≥ When the playback is finished or stopped, the screen to select [REPLAY],
[SELECT AGAIN] or [EXIT] is displayed. Select the desired item and press the ENTER button.
[DATE SETUP]: Select the date to be played back.
[SLIDES INTERVAL]: Selects the interval between still pictures at playback.
[MUSIC SELECT]: Select the music to be played on playback.
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
HC-V130_EB_EP_GC_SQT0053_mst.book 55 ページ ２０１３年１２月１７日 火曜日 午後４時１１分
To Next Page
Loading...
