- 136 -
About the Remote Pan Tilt Cradle
If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit
can automatically track the movement of the subject being recorded. This unit zooms in/out the
image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit.
1 Attach this unit to the Remote Pan Tilt Cradle.
≥ For details on attachment method, refer to the operating instructions of Remote Pan Tilt Cradle.
2 Connect the Remote Pan Tilt Cradle to this unit using the USB cable
(supplied with this unit).
A Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
3 Press the power button of the Remote Pan Tilt
Cradle to turn it on.
≥ The status indicator B lights on.
4 Turn on this unit.
5 Touch [Remote Pan Tilt Cradle].
≥ The Remote Pan Tilt Cradle Mode selection screen is
displayed.
≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle
is not recognised correctly, reconnect the USB cable.
≥ If you turn off and on this unit with the USB cable connected, this unit may operate in the previous
Remote Pan Tilt Cradle Mode.
6 Install the Remote Pan Tilt Cradle so that its
home position will face the front of the subject.
≥ The home position runs through the centre of the power
button.
Connecting the Remote Pan Tilt Cradle to this unit
To Next Page
Loading...
