- 73 -
Highlight Playback
Part that was recognised as clearly recorded is extracted from multiple scenes, and it can be played
back or stored in a short time with effects and music added.
It is also possible to create an original Highlight Playback by checking your favourite scenes and
setting up to extract those scenes.
1 Touch . (l 17)
2 Touch the desired effect.
≥ The scenes matching the effect will be extracted and displayed in the thumbnail view.
≥ Effects such as fade, slow-motion, still (pause), or digest playback are inserted.
≥ The date at playback is the date that was last recorded in an extracted scene.
≥ To change the settings, refer to page 75.
3 Touch in the thumbnail view.
4 Select the playback operation. (l 25)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SAVE] (l 78),
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
≥ Highlight Playback is not available for the following scenes :
s MP4/iFrame scenes
s Scenes recorded with Creative Control Mode (l 42)
s Scenes saved as Highlight Playback
s Scenes saved as manually-edited scenes (l 79)
≥ Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.
[POP]: Recommended for party scene.
[NATURAL]: Recommended for scenery.
[CLASSICAL]: Recommended for slow moving scene.
[DYNAMIC]: Recommended for fast moving scene such as sports scene.
[CUSTOM]: Set the combination of the effect and the music. (l 74)
ALL
To Next Page
Loading...
