- 209 -
About the Remote Pan Tilt Cradle
If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit
can automatically track the movement of the subject being recorded. This unit zooms in/out the
image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit.
1 Attach this unit to the Remote Pan Tilt Cradle.
≥ For details on attachment method, refer to the operating instructions of Remote Pan Tilt Cradle.
2 Connect the Remote Pan Tilt Cradle to this unit using the USB cable
(supplied with this unit).
A Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
3 Press the power button of the Remote Pan Tilt
Cradle to turn it on.
≥ The status indicator B lights on.
4 Turn on this unit.
5 Touch [Remote Pan Tilt Cradle].
≥ The Remote Pan Tilt Cradle Mode selection screen is
displayed.
≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle
is not recognised correctly, reconnect the USB cable.
≥ If you turn off and on this unit with the USB cable connected, this unit may operate in the previous
Remote Pan Tilt Cradle Mode.
//
Using Wi-Fi functions in combination with the Remote Pan Tilt Cradle
The Remote Pan Tilt Cradle can also be used by the following Wi-Fi functions. Make the Wi-Fi
connection after connecting the Remote Pan Tilt Cradle to this unit.
j [Remote Ctrl] (l 129)
j [Baby Monitor] (l 135)
j [Hom.Monitor] (l 138)
≥ When [Party Scene] or [Moving Object] is being used, moving object detection with
[Hom.Monitor] will not work. (l 142, 210)
≥
When [Baby Monitor] is being used, [Party Scene] and [Moving Object] cannot be used. (
l
210)
≥ Refer to [Help] in the “Image App” menu about operation methods on smartphones.
Connecting the Remote Pan Tilt Cradle to this unit
HC-V550M
To Next Page
Loading...
