- 43 -
Optical Image Stabilizer can stabilize the image without decreasing the image quality as much.
∫ Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
(Still Picture Recording Mode)
≥ The Image Stabilizer can also be turned on/off using the Touch Function. (l 61)
≥ Please refer to page 63 for details about Optical Image Stabilizer Lock.
Advanced (Recording)
Image Stabilizer Function [HC-V250]/[HC-V230]
: [RECORD SETUP] # [O.I.S.] # [Standard] or [Active]
[Standard]: Compensates for blurring caused by hand-shake
[Active]: Compensates for even greater blurring caused by hand-shake.
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]: The function works all the time.
[MODE2]: The function works when the button is pressed. We recommend
using this mode when you are recording yourself or recording with a tripod
in Still Picture Recording Mode.
Optical Image Stabilizer button
Press the button to turn Optical Image Stabilizer on/off.
(Motion Picture Recording Mode)
/ # (setting cancelled)
≥ When [O.I.S.] is set to [Standard], is displayed; when
[O.I.S.] is set to [Active], is displayed.
≥ When recording with a tripod in Motion Picture Recording
Mode, we recommend that you set the Image Stabilizer
(off).
(Still Picture Recording Mode)
/ # (setting cancelled)
≥ When [O.I.S.] is [MODE1], is displayed. When
[O.I.S.] is [MODE2], is displayed.
O.I.S.
To Next Page
Loading...
