Panasonic HC-V730 - Page 38

- 38 -
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen. (l 205)
You can change the operation icons (l 70) to display in the Touch Menu.
Register 3 favourite operation icons.
≥ The default settings are as follows:
1 Select the menu.
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
[ALERT SOUND]
: [SETUP] # [ALERT SOUND] # desired setting
(Volume low)/ (Volume high)/[OFF]
[SELECT OPERATION ICONS]
Motion Picture Recording Mode Still Picture Recording Mode
//
(PRE-REC) (Built-in flash)
(Video light) (Self-timer)
(Night Mode) (Backlight Compensation)
//
/
(Fade) (Built-in flash)
(PRE-REC) (Self-timer)
(Video light) (Backlight Compensation)
: [SETUP] # [SELECT OPERATION ICONS]
MENU
HC-W850
HC-W858
HC-W850M
HC-V750
HC-V757
HC-V750M
HC-V730
MENU