To Next PageTo Next PageWhy does my Panasonic HC-V777 turn off automatically?
If your Panasonic Camcorder turns off when you turn off the TV using the TV remote control, the VIERA Link function is enabled. If you are not using VIERA Link, disable it by setting [VIERA Link] to [OFF].
What to do if my Panasonic Camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
This message indicates that the Panasonic Camcorder has detected an error. Try restarting the unit by turning it off and then on again. If the error message continues to appear after restarting, the device likely requires repair. Detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair it yourself.
What to do if my Panasonic Camcorder is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
What to do if my Panasonic HC-V777 Camcorder won't operate even when turned on?
If your Panasonic Camcorder is on but not operating, remove the battery or AC adapter, wait about a minute, and reconnect it. Wait another minute, then turn the unit on again. Note that doing this while the media is being accessed may damage the data on the media. If normal operation isn't restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic Camcorder displays 'ERROR OCCURRED'?
If your Panasonic Camcorder displays the error message, it has detected an error. Restart the unit by turning it off, and then on again. If the unit is not turned off and on, it will be turned off in about 1 minute. If the error persists after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
Why does my Panasonic HC-V777 battery run down quickly?
If your Panasonic Camcorder battery drains fast, ensure it is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if the operating time remains short after a full charge, the battery is likely worn and requires replacement.
Why is my Panasonic Camcorder not detected when connected via USB?
If your Panasonic Camcorder isn't detecting the connected device via USB cable, and you're using only battery power, try reconnecting with the AC adapter plugged in.
Why is the battery indicator inaccurate on my Panasonic HC-V777?
If the remaining battery indication on your Panasonic Camcorder isn't displaying correctly, it's because the indication is an approximation. To recalibrate, fully charge the battery, then fully discharge it, and then charge it again.
What to do if my Panasonic Camcorder won't operate or is not working correctly?
If your Panasonic Camcorder isn't operating even when turned on, or isn't working normally, remove the battery or AC adapter, wait about a minute, then reconnect it. Wait another minute before turning the unit back on. If this doesn't restore normal operation, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic Camcorder arbitrarily stops recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure that you are using an SD card suitable for motion picture recording. If the data writing speed has deteriorated or after repeated recording and deletion, format the SD card or built-in memory using the unit. Also, if [AGS] is set to [ON], either record in the normal horizontal position or set [AGS] to [OFF].
General| Sensor type | BSI |
|---|---|
| Total megapixels | 24 MP |
| Optical sensor size | 1/2.3 \ |
| Effective megapixels (movie) | 12.76 MP |
| Digital zoom | 50 x |
| Optical zoom | 20 x |
| Image stabilizer | Yes |
| Interchangeable lens | No |
| Camcorder media type | Memory card |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 460800 pixels |
| Viewfinder type | Not available |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 2 lx |
| On Screen Display (OSD) languages | CZE, DEU, ENG, ESP, FRE, ITA, POL, SWE, TUR |
| Product color | White |
| Video resolutions | 960 x 540, 1280 x 720, 1920 x 1080 pixels |
| Video formats supported | AVC, AVCHD, H.264 |
| Maximum video resolution | 1920 x 1080 pixels |
| Maximum image resolution | 6528 x 3672 pixels |
| Still image resolution(s) | 4736 x 2664, 1920 x 1080, 5472 x3648, 3984 x 2656, 1728 x 1152 |
| Audio formats supported | AAC, MP4 |
| PictBridge | - |
| USB 2.0 ports quantity | 1 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Charging source | USB |
| Battery capacity | 1940 mAh |
| Battery life (max) | - h |
Weight and Dimensions| Depth | 139 mm |
|---|---|
| Width | 73 mm |
| Height | 65 mm |
| Weight | 353 g |
Explains recording formats like AVCHD, 4K MP4, MP4, and iFrame.
Guidelines for using built-in memory, including data backup and access lamp precautions.
Explains how condensation occurs and how to prevent it.
Identifies and describes the main physical components of the video camera.
Covers battery management, charging, and SD card insertion/removal.
Explains unit on/off, mode selection, touch screen usage, and date/time setup.
Covers camera positioning, selecting media, and recording motion/still pictures.
Explains how to play back content and use the device's menu systems.
Explains zoom usage and the Level Shot function for stabilization.
Details on using the sub camera and backup recording features.
Covers changing recording modes, manual settings, and specific modes like HDR and Slow Motion.
Covers playback operations, creating still pictures, and deleting/dividing scenes.
Includes playback by date, highlight playback, and converting files to MP4.
Details scene protection, copying, and connecting to a TV.
Instructions for copying data between SD card and built-in memory.
Steps for copying and playing back data using a USB HDD.
Information on dubbing recorded content to other devices.
Details on using an Eye-Fi card for data transfer.
Covers general Wi-Fi usage, setup, and connecting to networks/smartphones.
Details on using Remote Ctrl, Baby Monitor, and Home Monitor functions.
Covers DLNA playback, copying to PC, and Live Cast broadcasting.
Guide to installing the required smartphone application.
Information about the PC software for copying and editing data.
System requirements and steps for installing/uninstalling HD Writer AE 5.2.
How to connect the camera to a PC for data transfer.
Instructions for connecting and transferring files on a Mac computer.
Explains screen indicators and common error/confirmation messages.
Lists common problems, their solutions, and general safety precautions.
Covers SD card disposal, personal info, copyright, recording times, and optional accessories.
Instructions for connecting and using the optional pan tilt cradle.
