- 131 -
Using [Remote Ctrl] with a direct connection
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (l 161).
1 Press Wi-Fi button on this unit and touch [Remote Ctrl].
≥ It will go into connection standby for remote operation.
2 Start up the smartphone application “Image App”.
≥ (When [Direct Connection Password] is set to [OFF])
If this is the first time the smartphone is connecting to this unit, a message will be displayed on
the screen of this unit. Touch [YES].
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.
j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone
directly.
Using [Remote Ctrl] with a wireless access point
connection
1 Connect the smartphone to a wireless access point.
2 Press Wi-Fi button on this unit and touch [Remote Ctrl].
≥ It will go into connection standby for remote operation.
3 Start up the smartphone application “Image App”.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.
j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone
directly.
To Next Page
Loading...
