- 158 -
You can combine the relayed scene (l 104) in the built-in memory and the continued scene
in the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Touch [AVCHD] in the motion picture/still picture tab (l 38)
1 Insert the SD card that was used for Relay Recording.
2 Select the menu.
3 When the confirmation message appears, touch [YES].
≥ Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not
deleted.)
4 Touch [EXIT] when the relay scene combining complete message is
displayed.
≥ The thumbnail view of the SD card is indicated.
≥ Relay Recording information will be deleted when the relay scenes are combined, and Relay
Recording will be possible again.
≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed
scenes will not be possible.
Advanced (Playback)
Relay scene combining [WXF1M]
Relay-recorded scene Relay scene combining
: [EDIT SCENE] # [RELAY SCENE COMBINE]
MENU
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 158 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
To Next Page
Loading...
