What to do if my Panasonic HC-W580 Camcorder cannot be operated though it is turned on?
Remove the battery or AC adaptor, wait about 1 minute, and then reconnect. Wait another minute before turning the unit on again. If normal operation is still not restored, detach the power and consult the dealer from whom you purchased the unit.
What to do if my Panasonic Camcorder won't operate even when it's turned on?
If your Panasonic camcorder is on but not operating correctly, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. After another minute, turn the unit on again. Note that performing this while the media is being accessed may damage the data on the media. If normal operation is still not restored, detach the power connected.
Why does my Panasonic HC-W580 Camcorder battery run down quickly or not turn on?
If your Panasonic camcorder won't turn on, doesn't stay on long, or the battery runs down quickly, charge the battery again to ensure it is sufficiently charged.
What to do if images or sounds are not output even when the Panasonic HC-W580 Camcorder is connected to the TV by the HDMI mini cable?
Check if the HDMI mini cable is connected correctly. Ensure the HDMI mini cable is fully inserted.
What to do if images or sounds are not output even when my Panasonic HC-W580 Camcorder is correctly connected to a TV?
Please read the operating instructions of your TV and select the channel that matches the input used for the connection. Change the [TV ASPECT] setting to match the aspect ratio of the TV. The audio during playback mode is not output from this unit when connected to a TV. Sound levels cannot be adjusted using this unit, so adjust the sound on the TV.
What to do if Panasonic HC-W580 Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
If your Panasonic camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” try restarting the unit by turning it off and then on again. If the problem persists, detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit yourself.
Why is the color balance of images strange when recording in a place such as a gymnasium with my Panasonic HC-W580 Camcorder?
In a place with multiple light sources, such as a gymnasium or a hall, set the White Balance setting to (Indoor mode 2). If you cannot record clearly with the (Indoor mode 2), set it to (Manual adjustment mode).
Why does my Panasonic HC-W580 arbitrarily stop recording?
Use an SD card that can be used for motion picture recording. The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Format the SD card or built-in memory using the unit. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic HC-W580 Camcorder is not detected by the PC when connected by the USB cable?
After re-inserting the SD card into the unit, reconnect the supplied USB cable. Try another USB terminal on the PC. Ensure that you check the operating environment. After restarting the PC and turning on this unit again, connect the supplied USB cable again.
Why does the color or brightness change, or why do I see horizontal bars on the image of my Panasonic Camcorder?
Changes in color or brightness, or the appearance of horizontal bars in the image, can occur when recording under fluorescent, mercury, or sodium lighting. This is not a malfunction. In Motion Picture Recording Mode, use Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz. Note that in Still Picture Recording Mode, this will not affect the recorded image.
General| Sensor Type | BSI MOS Sensor |
|---|---|
| Optical Zoom | 50x |
| Recording Media | SD/SDHC/SDXC Memory Card |
| LCD Screen Size | 3.0 inch |
| Built-in Wi-Fi | Yes |
| Intelligent Zoom | 90x |
| F Value | F1.8 (WIDE) / F4.2 (TELE) |
| Recording Format | AVCHD, MP4 |
| Speaker | Dynamic type |
| NFC | No |
| LCD Screen Resolution | 460, 800 dots |
| Touch Screen | Yes |
| Built-in Flash | No |
| Sensor Size | 1/5.8 inch |
| Image Stabilization | HYBRID O.I.S. + |
| Dimensions | 60 mm x 62 mm x 129 mm |
| Focal Length | 2.06 mm - 103 mm |
| Focal Length (35mm equivalent) | 28.0 – 1740 mm |
| LCD Monitor | 3.0-inch LCD (460K dots) |
| Video Recording Mode | 1920x1080 |
| Audio Recording Format | Dolby Digital (2ch) |
| Microphone | 2ch Stereo |
| HDMI | Yes (Micro HDMI) |
| USB | USB 2.0 |
| Video Resolution | 1920 x 1080 |
| Battery Type | Lithium-ion |
| Digital Zoom | 150x/3000x (i.Zoom) |
To Next Page
