What to do if the SD card is inserted in another device and it is not recognised?
If an SD card from your Panasonic Camcorder isn't recognized in another device, ensure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) that you inserted.
What to do if the SD card is inserted in this unit and it is not recognised?
If the SD card is not recognized when inserted into your Panasonic Camcorder, and it was formatted on a PC, use the camcorder to format the SD card.
What to do if my Panasonic HC-W850 Camcorder is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder isn't being detected by your PC via USB, try these steps: First, re-insert the SD card into the unit, then reconnect the supplied USB cable. If that doesn't work, try a different USB port on your PC. Finally, restart both your PC and the camcorder, then reconnect the USB cable.
How to fix Panasonic Camcorder battery indication problem?
If the remaining battery indication on your Panasonic Camcorder is not displaying correctly, fully charge the battery, discharge it completely, and then charge it again. Note that the battery capacity indication is only an approximation.
What to do if my Panasonic Camcorder arbitrarily stops recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure you're using an SD card suitable for motion picture recording. The SD card's data writing speed might have deteriorated due to repeated recording and deletion, so format the SD card or built-in memory using the unit. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
How to fix Auto Focus function if it does not work on Panasonic Camcorder?
If the Auto Focus function is not working on your Panasonic Camcorder, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you're recording a scene that's hard to focus on in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
Why is the colour balance strange on my Panasonic HC-W850 when recording in a gymnasium?
If the colour balance of images from your Panasonic Camcorder appears strange when recording in a place such as a gymnasium, set the White Balance setting to (Indoor mode 2). If you cannot record clearly with the (Indoor mode 2), set it to (Manual adjustment mode).
Why do I see horizontal bars or colour/brightness changes on my Panasonic HC-W850 Camcorder?
If you notice color or brightness changes, or horizontal bars, on your Panasonic Camcorder's image, try these solutions: In Motion Picture Recording Mode, record in Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed to 1/100 in areas where the power supply frequency is 50 Hz, or 1/125 in areas of 60 Hz. In FULL HD Slow Motion Mode, setting the shutter speed to 1/100 seconds reduces the intensity of the problem.
What to do if scenes cannot be deleted on my Panasonic HC-W850?
If you are unable to delete scenes on your Panasonic Camcorder, release the protect setting. Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data.
Why are images or sounds not output even when my Panasonic HC-W850 is connected to the TV by the HDMI mini cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI mini cable, first check if the HDMI mini cable is connected correctly. Ensure the HDMI mini cable is fully inserted.
To Next Page
General