To Next PageTo Next PageWhy are images or sounds not output when my Panasonic HC-WX970 Camcorder is connected to the TV by the HDMI micro cable?
If images or sounds are not output when your Panasonic Camcorder is connected to the TV via HDMI micro cable, check that the HDMI micro cable is correctly and fully inserted.
Why does my Panasonic HC-WX970 stop recording on its own?
If your Panasonic Camcorder arbitrarily stops recording, ensure you are using an SD card suitable for motion picture recording. The recordable time may be reduced due to data writing speed deterioration or repeated recording and deletion. Format the SD card or built-in memory using the unit. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic HC-WX970 displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
If your Panasonic Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” the unit has automatically detected an error. Try restarting the unit by turning it off and on. Note that the unit will automatically turn off in about 1 minute if you do not manually turn it off and on. If the error repeatedly appears, even after restarting, disconnect the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit yourself.
What if my Panasonic Camcorder does not recognise the SD card?
If the SD card inserted in your Panasonic Camcorder is not recognized, format the SD card using the camcorder itself. If an SD card is formatted on a PC, it might not be recognized by the unit.
What to do if an error message appears on PC when the USB cable is disconnected from my Panasonic HC-WX970?
To safely disconnect the USB cable from your Panasonic Camcorder, double-click the icon located in the task tray and then follow the on-screen instructions.
Why does the color or brightness change on my Panasonic HC-WX970, or why do I see horizontal bars?
Color or brightness changes and horizontal bars may appear when recording under fluorescent, mercury, or sodium light. This isn't a malfunction. In Motion Picture Recording Mode, use Intelligent Auto Mode/Intelligent Auto Plus Mode, or set the shutter speed to 1/100 in 50 Hz areas, or 1/125 in 60 Hz areas. This will not affect the recorded image in Still Picture Recording Mode. In FULL HD Slow Motion Mode, setting the shutter speed to 1/100 seconds reduces the intensity of the problem.
What to do if my Panasonic HC-WX970 won't operate even when turned on?
If your Panasonic Camcorder is on but not operating, remove the battery or AC adapter, wait about a minute, and reconnect it. Wait another minute, then turn the unit on again. Note that doing this while the media is being accessed may damage the data on the media. If normal operation isn't restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic HC-WX970 Camcorder displays 'ERROR OCCURRED'?
If your Panasonic Camcorder displays the error message, it has detected an error. Restart the unit by turning it off, and then on again. If the unit is not turned off and on, it will be turned off in about 1 minute. If the error persists after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
Why does my Panasonic Camcorder battery run down quickly?
If your Panasonic Camcorder battery drains fast, ensure it is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if the operating time remains short after a full charge, the battery is likely worn and requires replacement.
I have forgotten the password for the Wi-Fi on my Panasonic HC-WX970, what to do?
If you have forgotten the Wi-Fi password for your Panasonic Camcorder, perform [Reset Wi-Fi Settings] from the Setup menu. This will restore the Wi-Fi settings to their original state at the time of purchase, allowing you to reconfigure the Wi-Fi settings. Note that this will delete all Wi-Fi settings, including the “LUMIX CLUB” Login ID and registered wireless access points.
General| Sensor Type | MOS |
|---|---|
| Sensor Size | 1/2.3 inch |
| Optical Zoom | 20x |
| Digital Zoom | 50x |
| Focal Length | 4.08 - 81.6 mm |
| LCD Screen Resolution | 460, 800 dots |
| Touchscreen | Yes |
| Microphone Input | Yes |
| Headphone Jack | Yes |
| Wi-Fi | Yes |
| NFC | Yes |
| Battery Type | Lithium-ion |
| Video Resolution | 3840 x 2160 |
| Stabilization | Hybrid Optical Image Stabilizer |
| Display | 3.0" LCD |
| Viewfinder | Yes |
| Recording Format | AVCHD / MP4 |
| Frame Rate | 60p / 30p |
| Audio Recording | Dolby Digital |
| USB | USB 2.0 |
| HDMI | Yes |
| Effective Pixels | 6.03 MP |
