To Next PageTo Next PageWhy doesn't the Auto Focus function work on my Panasonic HC-WX970?
If the Auto Focus function is not working on your Panasonic Camcorder, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are trying to record a scene that is difficult to focus on in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
What to do if the SD card is not recognized when inserted in another device from Panasonic HC-WX970 Camcorder?
If an SD card from your Panasonic Camcorder isn't recognized in another device, verify that the device supports the SD card's capacity or type (SD Memory Card/SDHC Memory Card/SDXC Memory Card).
What to do if the SD card from my Panasonic HC-WX970 Camcorder is not recognised in another device?
If the SD card from your Panasonic Camcorder is not recognized in another device, ensure that the device is compatible with the capacity and type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) you are using. Refer to the device's operating instructions for compatibility details.
Why my Panasonic Camcorder won't turn on or the battery drains fast?
If your Panasonic Camcorder cannot be turned on, does not stay on long enough, or the battery runs down quickly, try charging the battery again to ensure it is sufficiently charged. In cold environments, battery life may be shorter. Note that batteries have a limited lifespan and may need replacing if operating time remains short after a full charge.
Why are images or sounds not output when my Panasonic HC-WX970 is connected to a TV?
If the images or sounds are not output even when your Panasonic Camcorder is correctly connected to a TV, or if the images appear squeezed horizontally: * Consult your TV's operating instructions to select the channel that corresponds to the input used for the connection. * Adjust the [TV ASPECT] setting to match the aspect ratio of your TV. * Note that during playback mode, audio is not output from the camcorder itself; adjust the sound on the TV.
What to do if my Panasonic HC-WX970 is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
What to do if my Panasonic HC-WX970 Camcorder images or sounds are not output even when correctly connected to a TV?
If images or sounds are not output when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct channel that matches the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is not output from the camcorder, so adjust the sound on the TV itself.
How to fix a Panasonic Camcorder that won't turn on or has short battery life?
If your Panasonic Camcorder doesn't turn on, doesn't stay on long, or the battery drains quickly, ensure the battery is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if it still drains quickly after a full charge, it likely needs replacing.
Why is there no image or sound when my Panasonic HC-WX970 is connected to the TV?
If your Panasonic Camcorder is connected to a TV but you're not getting any images or sound, first consult your TV's operating instructions to select the correct input channel. If the images appear squeezed horizontally, adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. Note that during playback, sound levels are controlled by the TV, not the camcorder.
What to do if my Panasonic Camcorder is not detected by the PC when connected by USB cable?
If your Panasonic Camcorder is not being detected by your PC when connected via USB, try the following: Re-insert the SD card into the unit, then reconnect the USB cable. Try a different USB port on your PC. Ensure your operating environment is compatible. Restart your PC and the camcorder, then reconnect the USB cable.
General| Sensor Type | MOS |
|---|---|
| Sensor Size | 1/2.3 inch |
| Optical Zoom | 20x |
| Digital Zoom | 50x |
| Focal Length | 4.08 - 81.6 mm |
| LCD Screen Resolution | 460, 800 dots |
| Touchscreen | Yes |
| Microphone Input | Yes |
| Headphone Jack | Yes |
| Wi-Fi | Yes |
| NFC | Yes |
| Battery Type | Lithium-ion |
| Video Resolution | 3840 x 2160 |
| Stabilization | Hybrid Optical Image Stabilizer |
| Display | 3.0" LCD |
| Viewfinder | Yes |
| Recording Format | AVCHD / MP4 |
| Frame Rate | 60p / 30p |
| Audio Recording | Dolby Digital |
| USB | USB 2.0 |
| HDMI | Yes |
| Effective Pixels | 6.03 MP |
