11
VQT1N87
Before using
2
Parts identification and
handling
1 LCD monitor open part
2 LCD monitor (l 29)
Pull the LCD monitor out in the direction of the
arrow with your fingers.
≥ It can open up to 90o.
≥ It can rotate up to 180o A towards the lens or
90o B towards the opposite direction.
3 Optical image stabilizer button [ ,
O.I.S.] (l 43)
4 Mode select switch [AUTO/MANUAL/
FOCUS] (l 33, 57)
5 Reset button [RESET] (l 118)
6 Cursor button
Use the cursor button to select the recording
functions and playback operations, and to
operate the menu screen.
1 Select by moving up, down, left, right.
2 Set by pressing the centre.
≥ Menu screen operations (l 23)
≥ To select the recording functions (l 45, 49)
≥ To adjust manually (l 57)
≥ Playback operations (l 62, 67)
2
3
4
5
6
7
8
9
11
12
13
17
1
10
14 15
16
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
HDCHS9EP-VQT1N87_eng.book 11 ページ ２００８年１月１１日 金曜日 午後７時５２分
To Next Page
Loading...
