51
VQT1N87
Microphone level
AGC: Auto Gain Control
[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]:
The desired recording level
can be set. AGC will also be
activated to reduce the
amount of sound distortion.
[SET]:
AGC is not activated and so
natural recording can be
performed.
When recording, the input level from the built-in microphones
can be adjusted.
1 Select the menu. (l 23)
[VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET]
≥ Set [MIC LEVEL] to [AUTO] to set the microphone input level
automatically.
2 Move the cursor button to adjust the
microphone input level.
A Centre
B Front left
C Back left
D Front right
E Back right
F Microphone input level
≥ A gain value for each of the 5 built-in microphones is displayed.
(The input level of the microphones cannot be set individually.)
≥ Adjust the gain value so that the last 2 bars of the microphone
input level are not red. (Otherwise, the sound is distorted.) Select
a lower setting for gain value or set [MIC LEVEL] to [AUTO].
3 Press the cursor button to set and then press
the MENU button to finish the setting.
G Microphone input level meter
≥ Microphone input level meter is displayed on the screen.
Function Effect/Setting method
VIDEO
MENU
HDCHS9EP-VQT1N87_eng.book 51 ページ ２００８年１月１１日 金曜日 午後７時５２分
To Next Page
Loading...
