22
VQT1N87
Setup
3
Selecting a mode
(Turning the unit on/off)
Rotate the mode dial to switch to HDD recording, card recording, playback or power OFF.
Turn on the power by turning the mode dial to , or while pressing
the lock release button A.
The status indicator lights and the power turns on.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and set the date and time. (l 26)
To turn off the power
Set the mode dial to OFF.
The status indicator goes off and the power turns off.
When the mode dial is set to or , the power turns on when the LCD monitor opens and turns
off when the LCD monitor closes.
∫ To turn on the power
The status indicator A lights.
∫ To turn off the power
The status indicator A goes off.
HDD Recording mode (l 34, 39)
Card Recording mode (l 34, 39)
Playback mode (l 62, 67)
OFF
Turning the power on and off with the LCD monitor
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Status indicator B
≥ Align with the mark C.
Set the mode dial to OFF when this unit is not being used.
HDCHS9EP-VQT1N87_eng.book 22 ページ ２００８年１月１１日 金曜日 午後７時５２分
To Next Page
Loading...
