24
VQT1N87
You can select the language on the screen display and the menu screen.
1 Press the MENU button, then select [LANGUAGE] and press the cursor
button.
2 Select [English] and press the cursor button.
HDD Recording mode/ Card Recording mode
∫ [BASIC]
[SCENE MODE] (l 57)
[D.ZOOM] (l 42)
[GUIDE LINES] (l 49)
[CLOCK SET] (l 26)
[SET WORLD TIME] (l 28)
∫ [VIDEO]
[REC MODE] (l 36)
[25pDIGITAL CINEMA] (l 49)
[FADE COLOUR] (l 46)
[WIND CUT] (l 50)
[MIC SETUP] (l 50)
[MIC LEVEL] (l 51)
[AGS] (l 33)
∫ [PICTURE]
[PICT.QUALITY] (l 41)
[HI-SPEED BURST] (l 52)
[FLASH] (l 53)
[FLASH LEVEL] (l 53)
[RED EYE] (l 53)
[SHTR SOUND] (l 54)
∫ [ADVANCED]
[REC LAMP]
[ZEBRA] (l 54)
[COLOUR BARS] (l 54)
[MF ASSIST] (l 58)
[AUTO SLOW SHTR] (l 55)
[SHOOTING GUIDE] (l 38)
[Digital Cinema Colour] (l 55)
∫ [SETUP]
[FORMAT CARD] (l 77)
*1
[DISPLAY]
[DATE/TIME] (l 26)
[DATE FORMAT] (l 26)
[POWER SAVE]
Language selection
Menu list
The recording lamp lights up during recording
and flashes when the unit receives a signal
from the remote control or when the self-timer
is counting down. When this is set to [OFF], it
does not light during recording.
The screen indications are selected as shown
in the illustration below.
[OFF] [ON]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
≥ When using the AC adaptor, connecting the
unit to a PC, printer or DVD burner or PRE-
REC is used, the power saving function will
not activate.
1
+
HDCHS9EP-VQT1N87_eng.book 24 ページ ２００８年１月１１日 金曜日 午後７時５２分
To Next Page
Loading...
